NANOMECHANICAL MAPPING OF CARBON BLACK REINFORCED NATURAL RUBBER BY ATOMIC FORCE MICROSCOPY

Atomic force microscopy （AFM） has the advantage of obtaining mechanical properties as well as topographic information at the same time. By analyzing force-distance curves measured over two-dimensional area using Hertzian contact mechanics, Young＇s modulus mapping was obtained with nanometer-scale resolution. Furthermore, the sample deformation by the force exerted was also estimated from the force-distance curve analyses. We could thus reconstruct a real topographic image by incorporating apparent topographic image with deformation image. We applied this method to carbon black reinforced natural rubber to obtain Young＇s modulus distribution image together with reconstructed real topographic image. Then we were able to recognize three regions; rubber matrix, carbon black （or bound rubber） and intermediate regions. Though the existence of these regions had been investigated by pulsed nuclear magnetic resonance, this paper would be the first to report on the quantitative evaluation of the interfacial region in real space.     

BaFeO3-x与Cu-ZSM-5耦合催化剂的NOx储存还原性能

为替代传统的贵金属基NO_x储存还原（NSR）催化剂,本文设计并制备了不含贵金属的BaFeO_3-x+Cu-ZSM-5 耦合催化剂,用于催化消除稀燃发动机尾气中的NO_x. 在稀燃阶段,NO在BaFeO_3-x催化剂上发生了氧化和储存反应;在富燃阶段,从BaFeO_3-x催化剂中脱附出来未能消除的NO_x被置于其后的Cu-ZSM-5催化剂进一步催化消除. 实验结果表明,BaFeO_3-x+Cu-ZSM-5 耦合催化剂的工作温度窗口被拓宽到250-400 ℃,同时NO_x消除性能得到了显著提高：NO_x转化率最高可达98%,N₂选择性接近100%.     

C12-2-En-C12•2Br与SDS混合水溶液的胶团化研究

与[C12H25N＋(CH3)2CH2]2•2Br－(简记为C12-2-C12•2Br)/ C12H25SO4Na(SDS)混合水溶液相比,随着联接链上乙氧基团(E)数目增加,[C12H25N＋(CH3)2]2C2H4(OC2H4)n•2Br－(简记为C12-2-En-C12•2Br, n=2,3)与SDS混合水溶液澄清区域明显增大. C12-2-E3-C12•2Br/SDS混合胶团化过程中二组分产生了协同效应,理论预测在澄清区域所能达到的最小临界胶团总浓度(cmcT,min)= 0.0339 mmol•L－1,对应的SDS在溶液体相中的摩尔分数(x2*)=0.447.当水溶液体相中SDS摩尔分数(x2)=0.5时,混合胶团总聚集数(NT)=36,混合胶团中SDS的摩尔分数(x2M)=0.43.     

A chelating resin containing S, N and O atoms: Synthesis and adsorption properties for Hg(II)

A novel chelating resin containing S, N and O atoms (PSME-EDA) was synthesized by using poly(2-hydroxyethylmercaptomethylstyrene) (PSME) and diethanolamine (EDA) as materials. Its structure was characterized by elemental analysis, Fourier transform-infrared spectra (FTIR), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The adsorption of the resin for Hg²⁺ was investigated. The saturated adsorption capacity of PSME-EDA for Hg²⁺ could reach to about 1.1 mmol/g at 25 °C when the initial Hg²⁺ concentration was 0.02 mol/l. Some factors affecting the adsorption such as temperature, reaction time and ion concentration were also studied. The results showed that adsorption was controlled by liquid film diffusion. The increasing of temperature was beneficial to adsorption. The Langmuir model was better than the Freundlich model to describe the isothermal process. The values of ΔG, ΔH, and ΔS calculated at 25 °C were −7.99 kJ mol⁻¹, 22.5 kJ mol⁻¹ and 34.4 J mol⁻¹ K⁻¹, respectively. The adsorption mechanism of PSME-EDA resin for Hg(II) was confirmed by X-ray photoelectron spectroscopy (XPS).     

A first <Emphasis Type="Italic">P,N</Emphasis>-bidentate phosphite with a chiral ketimine fragment. Catalytic properties of its Rh<Superscript>I</Superscript> and Pd<Superscript>II</Superscript> complexes in comparison with those of phosphine analogs

A chiral P,N-bidentate aryl phosphite ligand containing peripheral (R)-(+)-camphor-derived ketimine and its rhodium(I) and palladium(II) chelate complexes were synthesized for the first time. These compounds were found to be suitable for asymmetric allylic substitution. The Pd-catalyzed sulfonylation of 1,3-diphenylallyl acetate with sodium p-toluenesulfinate gave the product in 73% ee; in the alkylation of the same substrate with dimethyl malonate, the ee was 94%. These ee values are higher than the enantioselectivity achieved with the known phosphine analogs.Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1942–1945, September, 2004.     

Ion chromatographic separation of hydrogen ion and other common mono- and divalent cations

We introduced an approach to the ion chromatographic determination of common mono- and divalent cations including hydrogen ion and demonstrated the ability of a C30 column dynamically coated first with dodecylsulfate and then with 18-crown-6 ether to separate the cations by ion-exchange mechanism. Using an ethylenediamine solution containing a small concentration of 18-crown-6 ether and lithium dodecylsulfate at pH 6.2 as eluent, the cations were eluted in the order Li < Na+ < NH4+ < H+ < K+ < Mg2+ < Ca2+ with symmetrical peaks. The conductivity vs. concentration plots were linear about three orders of magnitude, from millimolar to micromolar; and the detection limits were all < 0.6 microM. Rainwater was analyzed directly using this ion chromatographic system with satisfactory results.     

Structure and stability of hydrogen fluoride complexes with N,N-dimethylformamide

The structure, stability, and paths of formation of 11 (HF)_m(DMF)_n heterocomplexes (m = 1–4, n = 1, 2) were studied in terms of the B3LYP/6-31++G(d, p) density functional calculation. The results of this calculation suggest that: a) addition of hydrogen fluoride molecules to the (HF)_mDMF cyclic fragment is the basic tendency in complex formation in the HF-DMF system; b) data about the structure and properties of stable molecular forms that prevail in N,N-dimethylformamide solutions of hydrogen fluoride can be obtained by quantum chemical calculations for (HF)_mDMF complexes (m = 5–10).     

Synthesis of molecular ferromagnetics [R3R′X]MCr(C2O4)3 (X = N,R = Bun,R′ = Prn,Et, Me; X = P,R = Ph,R′ = Bun; M = Mn,Fe, Co,Ni, Cu)

The synthesis, IR spectra, and the temperatures of the transition into a ferromagnetic state (T _c) of layered ferromagnetics [R₃RX[MCr(C₂O₄)₃ (M = Mn, Fe, Co, Cu, and Ni) with the [Ph₃BuP]⁺, [Bu₃RN]⁺ (R = Pr, Et, and Me) cations capable of subsequently changing the distances between metallooxalate layers have been considered. The temperatureT _c has been found to be independent of the size of the organic cation. It is believed that the determining factors in the transition to a ferromagnetic state are exchange interactions inside the metallooxalate layer.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 2327–2330, September, 1996.     

Highly Selective Salicylate Membrane Electrode Based on N,N＇- （Aminoethyl）ethylenediamide Bis（2-salicylideneimine） Binuclear Copper（Ⅱ） Complex as Neutral Carrier

A new ion selective electrode for salicylate based on N,N＇-（aminoethyl）ethylenediamide bis（2-salicylideneimine） binuclear copper（Ⅱ） complex [Cu（Ⅱ）2-AEBS] as an ionophore was developed. The electrode has a linear range from 1.0 × 10^-1 to 5.0 ×10^-7 mol·L^- 1 with a near-Nemstian slope of （ - 55 ±1 ） mV/decade and a detection limit of 2.0 × 10-7 mol·L^-1 in phosphorate buffer solution of pH 5.0 at 25 ℃. It shows good selectivity for Sal^- and displays anti-Hofmeister selectivity sequence： Sal^-〉SCN^-〉 ClO4^- 〉I^-〉 NO2^- 〉Br^-〉 NO3^- 〉Cl^-〉 SO3^2- 〉 SO4^2- The proposed sensor based on binuclear copper（Ⅱ）complex has a fast response time of 5-10 s and can be used for at least 2 months without any major deviation. The response mechanism is discussed in view of the alternating current （AC） impedance technique and the UV-vis spectroscopy technique. The effect of the electrode membrane compositions and the experimental conditions were studied. The electrode has been successfully used for the determination of salicylate ion in drug pharmaceutical preparations.     

Studies on synthesis and kinetics of thermodecomposition of the nickel(Ⅱ) compounds with Schiff base derived from amino acids

Monoaqua salicylaldehyde-o-aminobenzoic acid Ni(Ⅱ) monohydrate (cp1) and monoaqua o-vanillin-o-aminobenzoic acid Ni(Ⅱ) monohydrate (cp2) were synthesized. The composition and structures of these two compounds were analyzed. Their thermal stability and non-isothermal kinetics were also investigated by use of TG and DTG curves. The possible reaction mechanisms in their first steps of thermal decomposition reactions were deduced by means of integral and differential methods. Thermodecomposition kinetic equations of the compounds are as follows:Cp1: da/At = A . exp(-E/RT) . 3/2(1 - a)4/3 . [1/(1 - a)1/3 -1]-1 Cp2 : da/At = A . exp(-E/RT) . (1 - a)